Tektronix Phaser 600 Enabling automatic language selection

CHANGING THE PRINTER’S LANGUAGE MODE

526

Enabling automatic language selection

Use the

AIS.PS

ﬁle to change a port to automatic language selection. After you

copy this ﬁle to a port, the printer accepts PostScript or HP-GL ﬁles on that port.

The port’s language change is persistent across print jobs and across printer power

cycles. To use automatic language selection, send the

AIS.PS

ﬁle to the printer.

1Locate the utility ﬁles on the Phaser 600 printer’s CD-ROM; refer to Installing

the ﬁles for instructions.

2Use one of the following methods to send the

AIS.PS

ﬁle to the printer:

■PC users: Use the DOS COPY command to send the ﬁle to the printer.

(Windows 3.1 users can also use the Copy command in the File

Manager.)

■Workstation users: Send the ﬁle to a printer as you would any

PostScript ﬁle.