SETTING UP THE PRINTER
16
Moving the printer to its operating location
After removing the printer from the
shipping pallet, you can wheel it to its
operating location. When doing so,
follow these guidelines:
■To move the printer, make sure that
the casters are unlocked (the
locking lever should be
up
).
■The casters on the printer are
designed for rolling on smooth,

inside

surfaces.
■Make sure that you have access to
all sides of the printer while you are
setting it up.
■Allow 30 cm (12 in.) from the wall to accommodate the ink loader.
CAUTION
To reduce the possibility of damage to the ink loader, position the rear of the printer
against a wall, rather than an aisleway.
9498-99