QUICK CLEANING
543
Cleaning the transport rollers 1To open the exit cover, push the latch (a, on
the lower right side of the printer)
DOWN
,
while holding the exit cover handle (b);
slowly rotate the cover down.
WARNING
When lowering the exit cover, be careful not to
pinch your hand between the paper roll cover and
the exit cover
2Using a lint-free cloth that has been moistened
with isopropyl alcohol (or a pre-soaked alcohol
cloth), gently wipe each of the transport rollers
to remove any dust or residue.
3Rotate each roller to make sure that you clean
its entire surface.
a
b
9480-116
9480-67