ENABLING AND DISABLING SYSSTART JOB EXECUTION
502
5Select one of the following files from the list, then click Open. (These files
were installed in the
Printer Utilities
folder inside the
PhaserTools
folder.)
■Use the
Set SysStart Job file to enable automatic execution of the
SysStart job.
■Use the
No SysStart Job file to disable automatic execution of the
SysStart job.
6At the prompt Save PostScript output as: you are asked for a file name
for saving printer output. Use either the default name given in the edit box or
type a new name.
7Click Save to send the file to the printer.
8If no output is returned by the printer, the
LaserWriter Utility
displays a dialog
box; click OK to continue.
If output is returned by the printer, you won't see this dialog box; check your
hard disk for the file the utility created for the printer's output.