INSTALLING THE STARTER PAPER ROLL
40
Loading the paper roll1Open the paper roll cover.
2Lift the paper roll holder out of the printer. Notice
that each end of the holder is unique:
aThe left side of the holder (closest to the ink
loader) has a removable plastic nut and
endcap.
bThe right side of the holder (closest to the
front panel) has a fixed endcap.
NOTE
The endcaps are set up for media rolls with a
three-inch core; if you are using media on a two-inch
core, the endcaps can be adjusted. Refer to Using a
2-inch core media roll: removing the core adapter for
instructions.
9480-07
9480-66
b
a