MEDIA HINTS AND TIPS
668
1For each endcap:
Align the tabs (a) on the inside of the
adapter with the “V”-shaped openings
(b) on the endcap’s core. The 4 teeth (c)
of the adapter fit over the endcap’s core.
Slide the adapter onto the endcap and
push until it snaps into place.
2Load the media roll as you would normally:
■Slide the media roll onto the shaft, so that the fixed endcap fits inside
the core of the media roll.
■Replace the removable endcap.
9480-132
a
bc