CONNECTING A SCSI HARD DISK
487
Important guidelines
When connecting a hard disk to the printer, follow these guidelines:
■The printer can support up to six external disks, or four disks and one
Copystation.
■You must turn on the disk(s)

before

you turn on the printer. Wait at least
one minute after turning on the disk(s) before turning on the printer.
■Terminators:
■The printer must always be at one end of the chain with a terminator at
the other end (or a terminated device such as the Phaser Copystation).
■The printer has an internal terminator.
■SCSI ID numbers:
■With multiple disks, each disk must have a unique SCSI ID number. Do
not turn on the printer or disk

until each disk has a unique number

.
■The printer’s SCSI number is 7, and the internal disk is number 4.
Valid ID numbers for the external disk are 0, 1, 2, 3, 5 and 6.