Tektronix Phaser 600 Printer , BIDIR.PS , UNIDIR.PS

BI-DIRECTIONAL STATUS REPORTING
509
NOTE
The printer is shipped with the uni-directional mode enabled.
1Follow the instructions in PC/Windows software to install the printer’s software.
Select Easy Install to automatically install the software, or select the
Printer
Utilities
item in the Custom Install: Utilities window.
2Locate the files in the
PHSR600 subdirectory, inside the PHSRTOOL directory
created on your hard disk by the installer application.
3Select one of the following files.
■Use the BIDIR.PS file to enable bi-directional status reporting on a
parallel port.
■Use the UNIDIR.PS file to disable bi-directional status reporting.
4Use one of the following methods to send the desired file to the printer:
■PC users: Use the DOS COPY command to send the file to the printer.
(Windows 3.1 users can also use the Copy command in the File
Manager.)
■Workstation users: Send the file to the printer as you would any
PostScript file.