Tektronix Phaser 600 Setting up the Phaser 600 printer driver

MACINTOSH SOFTWARE

Setting up the Phaser 600 printer driver

Note Phaser 600 driver is a Tektronix-modiﬁed version of Apple’s LaserWriter 7.1.2 printer driver. Use it if you are

using System Software 6.0.7, or 7.0 and later. It is the easiest driver to use.

1. After installing the printer’s software, including the Phaser 600 Driver (Installing printer

software for Macintosh), select Chooser from the Apple menu.

2. Click on the Phaser 600 printer driver icon on the left side of the Chooser.

3. Click on the Zone for your printer. See your network administrator if you have questions.

4. Click on your Phaser 600 printer in the list of printers on the right side of the Chooser. If it

is not in the list, check your hardware connections and which zone you have selected in the

Chooser.

5. Close the Chooser.