Tektronix Phaser 600 Print Start Page

PRINTING THE STARTUP PAGE
709
Macintosh utility file: Print Start Page
NOTE
If you are using QuickDraw GX, you can use the Tektronix Phaser 600 GX driver to
print a copy of the printer’s startup page.
1Install the utility files from the Phaser 600 printer’s CD-ROM; see Macintosh
software for instructions.
2Select the appropriate printer in the Chooser.
3Locate the
LaserWriter Utility in the PhaserTools folder on your hard disk, and
double–click its icon to start the application.
4Choose Download PostScript File from the Utilities menu.
5Select the
Print Start Page file from the list, then click Open. (This file was
installed in the
Printer Utilities folder, inside the PhaserTools folder.)