Tektronix Phaser 600 Using the PC/workstation Setscreen utility le

PRINTED COLORS ARE NOT WHAT YOU EXPECTED
649
Using the PC/workstation Setscreen utility file
1Follow the instructions in PC/Windows software to install the utility files from
either the Phaser 600 CD-ROM or the Printer Software for Windows diskette.
2Locate the installed files in the
PHSR600 subdirectory, inside the PHSRTOOL
directory on your hard disk.
3Use one of the following files:
■Select SCREENON.PS to enable setscreen operations.
■Select SCRENOFF.PS to disable setscreen operations.
4Use one of the following methods to send a file to the printer:
■PC users: Use the DOS COPY command, or the Copy command in
Windows 3.1 File Manager, to send the file to the printer.
■Workstation users: Send the file to the printer as you would any
PostScript file.