CONFIGURING A PRINTER’S SERIAL PORT
475
1See Installing the utility files to locate the printer’s utility files.
2View the
DEVPARAM.PS
file in a text editor and substitute the values you want
to use for the current values. The possible values for each parameter are
listed in the Parameter values table; the values are case-sensitive and must be
entered exactly as shown in the table.
3Save the file.
4The printer’s port you are using should be configured to receive PostScript. If
you have questions, see Using Different Printer Language Modes for more
information.
5Use one of the following methods to send the file to the printer:
■PC users: Use the DOS COPY command to send the file to the printer.
(Windows 3.1 users can also use the Copy command in the File
Manager.)
■Workstation users: Send the file to the printer as you would any
PostScript file.