TESTING PRINTER LANGUAGE MODE CHANGES
529
Testing PostScript mode
PSTEST.PS
is a PostScript file that prints a single line of text if the printer is
operating in PostScript mode.
Send the
PSTEST.PS
file to the printer after you send the
PSCRIPT.PS
or
AIS.PS
file
,
to make sure the language change was made correctly.
1Locate the utility files on the Phaser 600 printer’s CD-ROM; refer to Installing
the files for instructions.
2Use one of the following methods to send the
PSTEST.PS
file to the printer:
■PC users: Use the DOS COPY command to send the file to the printer.
(Windows 3.1 users can also use the Copy command in the File
Manager.)
■Workstation users: Send the file to the printer as you would any
utility file.