Before Calling For Service
Before calling for service, check the following to avoid unnecessary service charges.
Be sure to check these items first:
•Is there a power outage in the area?
•Is the household fuse blown or the circuit breaker tripped?
•Is the range disconnected from the electrical supply?
If the Burners do not Ignite
•Are the burner caps properly aligned and seated in the burner bases?
•Are the burner ports clogged?
•Is a fuse blown or is the circuit breaker tripped?
•Is the manual
Data Rating Label
The data rating label shows the model and serial number of your range. It is located on the frame, behind the oven door (See illustration).
CAUTION:
Before removing the toe kick panel, disconnect the range from the electrical power supply. Reinstall the toe kick panel before reconnecting the range to the power supply and operating the range.
Service Information
For handy reference, copy the information below from the data rating plate. Keep your invoice for Warranty validation.
Model Number
Serial Number
Date of Purchase
Dealer’s Name
Dealer’s Phone Number
Service Center's Name
Service Center’s Phone Number
Also, enter this information on the Product Registration Form included with this product, then mail it to the indicated address.
Rating label(s) located under front edge of cooktop.
Wiring/schematic dia-
grams placed behind toe
kick panel.
Figure 28: Rating Plate and Wiring Diagram Locations (oven door not shown)
The electric wiring diagrams and schematics are attached behind the toe kick panel, and should not be removed except by a service technician. Replace after service.
English 34