4 When the AUTHENTICATION screen is displayed, enter the user name and password by pressing the [USER NAME] and [PASS- WORD] buttons, and press the [ENTER] button.
yWhen pressing each button, the letter entry screen is displayed. Enter the value using the keyboard and digital keys, and press the [ENTER] button to set the entry.
This screen is displayed only when the User Authentication for Scan to E-mail is enabled. When this screen is displayed, you must enter your user name and password to login the SCAN TO E-MAIL screen. For user name and password, ask your network administra- tor.
5 Specify the E-mail addresses that you want to send, and press the [SETTINGS] button.
yYou can specify the E-mail address by various ways. See the following procedures for each instruction.
P.59 “Specifying Destinations”
You can press the [START] button to start sending the E-mail at this screen if you specify an E-mail address and the From Address has been set in TopAccess E-mail setting page or set by the User Authentication for Scan to E-mail setting.
How to Perform Scan to E-mail 53
