VBrick Systems V4.4.3 manual Configuring the Group ID

Server Administration

TTo configure the Portal Server for RSA Authentication:

1.Launch the Portal Server Admin Console and click on Access Control in the left navigation panel. (Note that the following screen shows sample data.)

2.Check the Use RSA authentication option to enable RSA authentication.

3.Populate the User ID, E-Mail, and Group fields as explained below:.

User ID Field Name	Name of the HTTP header field that will store the unique User ID.
	For Vodafone, this may be the VDUID or the E-Mail address.
E-Mail Field Name	Name of the HTTP header field that will store the user's e-mail
	address.
Group Field Name	Name of the HTTP header field that will store the user's group/
	organization membership. For Vodafone, this will be the VfOpCoID.
Use Group ID	Check this box if the Group Field Name (above) returns a group ID
	rather than a group name. For Vodafone, this should be checked.

Configuring the Group ID

The User Group ID field (see below) will display only if the Use Group ID box is checked on the Access Control page. The User Group ID is a unique identifier for the group. To set the

Group ID, go to User Groups > Add User Groups > Add/Modify Group Information.

ETV Portal Server Admin Guide 101