port (10021 for example), then you start the FTP Guardian service. It binds to port 21 and all incoming FTP clients communicate using a secure front that proxies the calls to IIS on port 10021. Be aware that this add-on, for Windows servers only, is not sold or supported by VBrick. It requires a server wrapper and additional .dlls.

TTo install FTP Guardian:

1.Go to http://www.tcpdata.com/ftpg_license.shtml

2.Click and run Download ftp Guardian Server Wrapper - 600K on the VOD server.

3.Click Download SSL Libraries - 380K on the VOD server.

Then open the .zip file and copy libeay32.dll and ssleay32.dll into C:\Program Files\ftpgs

Creating a VOD-WM FTP Server

If you are using a VOD-WM-Enterprise or VOD-WM-Standard (Microsoft Windows Media) server, you must install and configure a standard FTP server on the VOD-WM server as explained below. (For more about Microsoft Windows Media servers see ETV VOD Servers on page 6.)

TTo create a Microsoft Windows Media FTP server: On the Microsoft Windows Media Server:

1.Install the FTP server.

2.Set the default FTP directory to the Microsoft Windows Media Server's default Publishing Point directory.

3.Create and configure an FTP user account with full permissions (read/write, rename/ delete etc.) on the directory specified above. If using the VBrick default, this account's user name is vbrickuser and the password is vbrickuser. Hint: use the settings of the anonymous account as an example.

4.Verify that the directory specified in Step 2 above is set to allow the FTP user account full permissions.

On the Portal Server:

5.When the Microsoft Windows Media Server is created or modified, specify the user name and password created in Step 3 above in the FTP User Name and FTP Password fields on

the Add/Modify VOD/FTP Servers page.

Creating a VOD-D FTP Server

If you are using a VOD-D (Darwin) server, you must install and configure a standard FTP server on the VOD-D server as explained below. (For more about Darwin servers see ETV VOD Servers on page 6.)

TTo create a Darwin FTP server: On the Darwin Server:

1.Install a standard FTP server on port 21.

2.Set the default FTP directory to the Darwin Server's Media Folder directory (also called the Publishing Point) or create a virtual directory of the FTP root pointing to the Darwin server's Media Folder.

3.Create and configure an FTP user account with full permissions (read/write, rename/ delete etc.) on the directory created above. If using the VBrick default, this account's user name is vbrickuser and the password is vbrickuser. Hint: use the settings of the anonymous account as an example.

38

© 2009 VBrick Systems, Inc.

Page 50
Image 50
VBrick Systems V4.4.3 manual Creating a VOD-WM FTP Server, Creating a VOD-D FTP Server