VBrick Systems V4.4.3 manual Ingesting Content, Configure a VOD-W Server

Remove Programs

Purchased Content Ingestion

d. Set permissions to allow for anonymous FTP and close IIS.

3.Copy the Excel spreadsheet from the flash drive to your C:\ drive.

4.Install the license file (for example content_34294950443.lic) using the Windows Add or

utility.

a.Go to Start > Control Panel > Add or Remove Programs > VBrick Media Control Server Suite.

b.Click Change/Remove and select Install/Replace the EtherneTV Content license file.

c.Click Next, then browse to the file and click Open.

5.Manually close the window when done. See Installing Serial Numbers and License Files on page 15 for more information.

Ingesting Content

Configure a VOD-W Server

VOD-W only. Use the following steps, prior to ingestion, to change the Transfer Rate from 10,000 to 1,000,000 Kbps. Make sure to change the ingestion limit back to 10,000 after all content has been ingested.

TTo change the ingestion limit on a VOD-W:

1.Go to Start > Control Panel.

2.Click on VOD-W QuickVideo.

ETV Portal Server Admin Guide 193