Global Settings
ETV Portal Server Admin Guide 53
Figure 13. Connecting Control Devices
Tabl e 11 . Device Connectors
† Typical device connector.
Configure Control Devices
You also need to configure the baud rate and passthrough state of the VBrick associated with
a control device. In VBAdmin, go to the System Configuration > Advanced Configurations >
Passthrough page and set these values as follows:
Tabl e 12 . Baud Rate and Passthrough State
Device Connector
VCR DB-9 †
DVD DB-15 †
MPEG-1 Encoder DB-9
MPEG-2/4/WM Encoders RJ-45
Device Baud Rate Passthrough State
DVD 4800 Responder
VCR 9600 Responder
VBIR 2400 N/A