3.On the following window, select Enable and click Next, then OK to exit. This will enable the machine as a warm backup. This will complete the configuration and there is no need to reboot the server.
4.When finished, launch ETV Backup using the desktop icon.
6. Test the Configuration
When you are finished configuring the IP addresses, click the Run 
icon in the navigation footer. All backup profiles should run without errors and a window similar to the one shown below will report a successful backup for each profile. If problems occur, for example if you entered an invalid IP address, the window will report any failures. Correct the problems using the information provided in the log window and try again.
TTo test the configuration:
1.Highlight the MCS Warm Backup Group and click Run.
2.Click Continue Run for each Differences for profile: xxxxx window and then OK.
3.If no errors occur, a window similar to the one shown below will be displayed.
164 | © 2009 VBrick Systems, Inc. |
