Xerox 8825, 8855, 8830 manual

XES Synergix 8825/8830/8850/8855 Digital Solution User Guide			122
	Table 7. Problem-solving table (continued)
Problem	First solution to try	Second solution to try	Third solution to try
Scanner control
The Scanner does not scan when a	Press the Start key or enable
document is inserted.	AUTOSCAN. See "Scanner control"
	in the "Main Menu" section for more
	information.
The Scanner measures the width of	Clean the Platen Glass.	Turn AUTOWIDTH off. See
the original incorrectly. The copy is		"Scanner Control" in the "Main
either wider than the original or the		Menu" section for more information.
copy is clipped.
When the Scanner is set to exit to	Raise the Thick Document Lever to	Set the Scanner to exit to the rear.
the front, the document is difficult to	release the document. Be sure to	See "Scanner Control" in the "Main
remove from the Scanner.	lower the Thick Document Lever	Menu section for more information.
	before making the next copy/scan.