Xerox 8830, 8825, 8855 manual Media Selection

Getting to know the Synergix Digital Solution (continued)

MEDIA SELECTION

The Media Selection area of the Scanner Control Panel allows you to select the media Source, Type, and Output Format. The illustration below depicts the Media Selection portion of the Control Panel.

Media Selection

Source		Type		Output Format
	Sheet				Manual
			Film
	R3		Vellum/		Preset
	R2 R4
	R1		Tracing		Synchro
			Bond
	Auto

Source

The Source option allows you to select the source of the media on which the image will be printed. To select the media source, press the key beneath the Source settings until the desired source indicator lamp illuminates.

The Source settings are:

•Sheet – This setting tells the Printer to print from a manually inserted sheet of media.

•R4 – This setting is applicable to the Synergix 8855 Digital Solution only. When it is selected on the 8855 Digital Solution, both the R1 and R3 indicator lamps illuminate and the Printer selects the media stored on Roll 4.

•R3 – This setting is applicable to the Synergix 8830 and 8855 Digital Solutions only. When it is selected on those systems, the R3 indicator lamp illuminates and the Printer selects the media stored on Roll 3.

•R2 – This setting tells the Printer to select the media stored on Roll 2.

•R1 – This setting tells the Printer to select the media stored on Roll 1.

•Auto (factory default) – This setting automatically selects the roll containing the media that best fits the size of the captured image. For most documents, the Scanner is able to automatically detect the width of the scanned document. This permits the Auto function to automatically select the most appropriate roll of media.

NOTE: Roll 2 and sheet feed are optional on the Synergix 8825 Digital Solution. If these options are not installed, they cannot be selected. To print from a cut sheet, Sheet mode must be explicitly selected. The Auto mode cannot select a cut sheet.

XES Synergix 8825/8830/8850/8855 Digital Solution User Guide 7