Special features keys (continued)
Transform key
The Transform feature contains the following menu choices:
MARGINS - Allows you to adjust the dimensions of the margins around the image. By entering positive margins, blank space is inserted around the image. By entering negative values, unwanted parts of the image can be cropped.
JUSTIFICATION – Allows you to adjust the position of the image on the media.
TRANSFORM – Allows you to request transformation of the scanned image into a mirror image, a negative photographic inversion, or both.
NOTE: The image can also be rotated. Refer to "Imaging" in the "Copy Options" section for further information about image rotation.
To access the TRANSFORM MENU:
1.Press the Transform key. The TRANSFORM MENU screen is displayed. The selected option is highlighted.
TRANSFORM MENU
MARGINS
JUSTIFICATION
TRANSFORM
2.Press the Previous or Next key to highlight the desired option.
3.Press the Enter key to select the highlighted option. The screen for the selected option is displayed.
Margins
The MARGINS option of the TRANSFORM MENU allows you to select the dimensions for the margins that surround an image. These margins are referred to as the lead, left, right and trail edges.
NOTE: Margins can only be adjusted when the Synergix Digital Solution is in the COPY mode.
The example below illustrates an image entering the Scanner and the orientation of the image margins.
Scanner
Lead edge |
Right image edge | Left image edge |
Trail edge
Margins are added to the image in one of two ways:
•If Synchro has been selected from the Output Format area of the Scanner Control Panel, the lead margin is added before the image is printed. The trail margin is added after the media cut signal is received from the Scanner. Thus, the length of the media from the Printer will be the scanned document length plus the lead and trail margins.
•If a fixed media length (Preset or Manual) has been selected as the Output Format, the white space of the specified margin surrounds the image, but the actual physical dimensions of the media remain as specified. The margins reduce the allowable area on the media in which the image may be placed.
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide | 53 |
