Special features keys (continued)
RECALLING THE LAST JOB
Use the RECALL LAST JOB option to recall the information from the last job. To recall the last job information:
1.Press the Store/Recall key. The Store/Recall menu screen is displayed.
2.Press the Enter key to select LAST JOB. The LAST JOB menu screen is displayed.
3.Press the Enter key to select RECALL LAST JOB. The screen shown below is displayed.
COPIER PARAMETERS AND IMAGES
FOR LAST JOB RECALLED
PRESS ENTER TO CONTINUE
4.Press the Enter key to return to the READY screen.
You can now use the settings as they have been recalled, or you can change one or more of them.
NOTE: The recalled job must be printed or cleared before the next document can be scanned. If there is no last job to be restored, as is the case at power up or after the last job has been deleted, a warning message will advise you.
DELETING THE LAST JOB
If, for security reasons, the parameters and images of the last job should not be left stored, use the DELETE LAST JOB option.
To delete the information from the last job:
1.Press the Store/Recall key. The STORE/RECALL menu screen is displayed.
2.Press the Enter key to select LAST JOB. The LAST JOB menu screen is displayed.
3.Press the Next key to highlight DELETE LAST JOB.
4.Press the Enter key to select DELETE LAST JOB. A delete confirmation screen is displayed. The default response is NO.
DELETE LAST JOB
ARE YOU SURE?: 
NO
5.Press the Previous or Next key to change the response to YES.
6.Press the Enter key to confirm the deletion. The screen shown below is displayed. The last job images and parameters are deleted.
JOB PARAMETERS AND IMAGES
FOR LAST JOB DELETED
PRESS ENTER TO CONTINUE
7. Press the Enter key to return to the READY screen.
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide | 41 |
