STARTING AND STOPPING THE SYSTEM
Powering on procedure Power on the IPS system in the following sequence:
1.Power on all peripherals, such as the optional tape drive and display monitor.
2.If your system is
Note: The HCU displays a 2. When the Sun workstation is completely booted, the display shows 0.
See “HCU Messages” in the Xerox DocuPrint IPS Messages
Guide for a list and explanation of HCU codes.
3.Power on the printer, if necessary.
4.Power on the Sun workstation processor. The operating system for the Printer Controller and the IPS application software are automatically loaded.
5.If the printer is not warmed up by the time the Controller has booted, the window containing the message DocuPrint IPS Initializing, “Waiting for Printer Configuration” remains on the screen. Either:
•
•
Wait for the printer to warm up and the message to disappear (which takes a varying amount of time), or,
Use the following procedure to reduce the amount of boot time:
a.With the cursor on the blue screen background, click the right mouse button to display the workspace pull- down menu.
b.Select Restart from the workspace menu, then Confirm from the confirmation prompt that displays. The Printer Controller reboots.
c.After the Controller boots, a window displays with the message “Media Definition Conflict” (because no default input configuration has been applied). Click OK to display the Input Configuration window.
d.Make sure the paper loaded in the feeder trays matches the stock specified in the Printer Trays cells on the Input Configuration window. If it does not, make any necessary changes to the paper in the trays or to the media icons in the tray cells. (Refer to “Specifying the input configuration” in the “Setting the system configuration” chapter.)
e.Click Apply & Update on the Input Configuration window.
f.On the confirmation prompt window that displays, click Apply.
g.Click Quit on the Input Configuration window. The IPS main window displays.
XEROX DOCUPRINT 92C IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM |
