INTRODUCTION TO THE GRAPHICAL USER INTERFACE
Setup and status information
The following system setup and status information is displayed in the right column of the IPS main window:
Control Unit Configuration section Displays the current configuration of the system. Items that appear here include:
Figure 1-18. Control Unit Configuration section of main window
•
•
•
•
Highlight Color — Displays the color dry ink installed in the printer.
Resolution — Shows the resolution in dpi of the fonts used in the current or most recent job sent to the IPS. This field reflects the value entered on the Resolution window, accessible through the Configuration
Rotation — Indicates whether Continuous Forms Emulation is enabled.
Privilege Mode — Indicates the current Privilege Mode (Service, Administrator, Operator, or User).
Note: When a remote Shell is activated, “Remote Shell Active” displays on the window.
When a remote Shell is activated and a service representative dials in remotely, “Remote Session Active” displays on the window.
For information on activating a remote shell, refer to the “Setting up the printer controller” chapter, “Enabling or disabling the modem” section. 
XEROX DOCUPRINT 92C IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM |
