Xerox 92C IPS manual Rotating the page origin, Var/db/palettename

SETTING THE SYSTEM CONFIGURATION

4.From the Trace Mode pull-down menu, select Execute Trace. The Default Trace File Name prompt window displays.

5.On the Default Trace File Name window, enter the following path:

/var/db/palettename

where palettename is the file name of the palette you want to print (such as royal2_palette.trace).

6.Click Apply. The system prints ten copies of the specified palette.

7.After printing has completed, select Normal Operation from the Trace Options window.

Rotating the page origin

If you want to print a job that was designed for a continuous forms printer, you can enable the job to print on the cut-sheet IPS printer by rotating its page origin 90 degrees. When you do this, the IPS emulates a continuous forms printer while printing on cut sheets.

Example: Suppose you wanted to print a continuous forms job designed for 17 by 11-inch (or possibly A3) paper on your IPS, which uses cut sheets.

•The page or text origin is always in the upper-left corner of the printed page.

•For continuous forms printing, the longest edge (17 inches) is the top edge. (See the illustration below.)

For cut-sheet printing, the short edge (11 inches) is the top edge. (See the illustration below.)

XEROX DOCUPRINT 92C IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 4-13