Xerox 92C IPS Buttons, Cancel Job, 6. Example of a selection button from the IPS main window

INTRODUCTION TO THE GRAPHICAL USER INTERFACE

Buttons

A selection button displays as an oval or box (except for the Stop and Continue buttons) containing a function name, but no inverted triangle.

Figure 1-6.Example of a selection button from the IPS main window

Cancel Job

To use a button:

1.With the cursor positioned over the button, click the left mouse button.

2.If the selection button is a toggle (turning a selection on/off), you can alternately select and deselect it by repeatedly clicking it with the left mouse button.

Incremental spin buttons An incremental spin button consists of a line displaying a numeric value, with buttons next to it containing arrows.

Figure 1-7.Example of incremental spin buttons

To select an item that has incremental spin buttons:

1.Position the cursor on the triangle (up arrow) button to increase the value displayed, or on the inverted triangle (down arrow) to decrease the value.

2.Repeatedly click or hold down the left mouse button until your desired value is displayed.

Note: You can also enter the values on the line next to the spin buttons. Refer to “Entering text,” later in this chapter.

Note: On some windows, the value you enter or select is displayed in the lower-left or -right corner of the window. It remains until you close the window or enter a selection/value elsewhere on that same window.

XEROX DOCUPRINT 92C IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 1-5