Xerox 92C IPS manual Selecting channel interface, 3. Channel Options window

SETTING UP THE PRINTER CONTROLLER

Selecting channel interface

To specify your interface as a bus and tag channel (parallel channel interface), follow these steps:

1.Select Channel from the Interface window pull-down menu. The Channel Options window displays.

Figure 3-3.Channel Options window

2.On the Channel Address (HEX) keypad, click the alphanumeric characters to specify the last two digits of the hexadecimal channel address of your host.

3.From the Channel Mode pull-down menu, select the channel mode for your system. The channel modes specify the operation of the channel signals, determine the data speed, and specify whether the channel interface mode is interlock or data stream.

•

•

•

•

Single Tag — Single-tag interlock mode. This is the basic channel transfer mode. It is the slowest method of data transfer. Select this mode when no other transfer mode is available on the host.

High Speed — High-speed transfer mode. Although it maintains a single-tag interlock mode, this mode provides a higher speed of data transfer than the single-tag mode.

1.25Mb Data Streaming — Data streaming at 1.25 MB per second. This mode is faster than either of the two single-tag interlock modes.

2.5Mb Data Streaming — Data streaming at 2.50 MB per second. This mode provides the fastest data transfer.

4.Click Apply.

5.In the Interface window, click Apply.

3-4 XEROX DOCUPRINT 92C IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM