SETTING THE SYSTEM CONFIGURATION
•
•
•
Note: After you complete all edits to your media icon, click Apply, and close the Create a new Media Icon window, your temporary form type will be deleted.
If you want to save the temporary form type to the Form Type list, do the following before closing the window:
1.Click the Add button. The Add a New Form Type window displays with your temporary form name already displayed on the New Form Type Name line.
2.Click the Add button. Your formerly temporary form name will now appear in the Form Type list. 
To delete a name from the Form Type list: Click the item to be deleted, then click the Delete button located below the Form Type box.
Weight (lbs.) — Specifies in pounds the weight of the media you are adding. Use the incremental spin buttons to display your desired paper weight. You can specify weights only within the range supported by your printer.
For information on changing the weight units, refer to the “Specifying the media units” section earlier in this chapter.
Color — Specifies the color of the stock represented by the media icon you are creating. There are two ways to do this:
—Select a standard stock color by clicking one of the color boxes in this field.
—Specify another color by entering its name on the Other Color line below the color boxes. The text you enter also displays in the media icon display box at the bottom of the screen.
Icon display box — Displays the media icon you are currently creating or changing, and reflects all changes as you make them.
5.Click Apply. Your new media icon displays in the Media Library window.
Note: If you want the Create a new Media Type window to remain open while you create multiple icons, be sure the pin button in the upper left corner of this window is “in” before you click Apply. Otherwise, the window closes when you click Apply, and you must reopen it to create another icon.
•To “push the pin in,” click once the pin button that is in the “out” position.
•When you are finished creating icons, click once the pin button (in the “in” position), or click the Cancel button to close the window. 
6.Repeat steps 3–5 for any additional media icons you wish to create.
XEROX DOCUPRINT 92C IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM |
