SETTING THE SYSTEM CONFIGURATION
Specifying the media units
This section describes the procedure for specifying the media units you want to use for weight and size. The specified units are used on the IPS main window.
To specify the weight and/or size units:
1.From the Configuration menu, select Media Units. The Media Units window displays.
Figure 4-7. Media Units window
2.For weight, select g/m2 or lb as the desired units.
3.For size, select mm or in as the desired units.
4.Click Apply. A confirmation window displays.
5.Click OK to confirm your selections.
XEROX DOCUPRINT 92C IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM |
