SETTING THE SYSTEM CONFIGURATION
Specifying stitching attributes To specify stitching attributes, follow these steps:
(for systems with a stitcher)
1. On the Output Configuration window, check the “Stitching” box, then click the Stitching Attributes button. The Stitching Attributes window displays.
Figure 4-46. Stitching Attributes window
2.On the Stitching Attributes window, make selections or enter values in the fields described below.
•
•
•
•
Set Sheet Delivery — Specifies whether sheets will be delivered Face Up or Face Down.
Page Order within Set — Specifies the order in which pages in a set will be delivered to the output bin:
—1 to N — Output sheets are delivered to the output bin in ascending order (the first page is delivered first).
—N to 1 — Output sheets are delivered to the output bin in descending order (the last page is delivered first).
Note: The size of the ordered set must fall within the specified maximum set size. 
End of Set Criteria — Specifies the criterion that marks the end of a set for your system.
—Offset Stacker — A JOG (offset) command in the job indicates the end of a set.
—MarkForm — A MARKFORM command in the job indicates the end of a set.
Maximum Set Size — Specifies the maximum number of sheets that can be in a set. The range for DFA sets is 10 to 50.
XEROX DOCUPRINT 92C IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM |
