Xerox Pro 580 manual Click OK to start printing

5If you want to change the setting for print quality, click the Graphic tab.

The Resolution option allows you to select the print resolution. The higher the setting, the sharper the clarity of printed characters. Higher settings may increase the time it takes to print a document.

The Toner Save Mode option allows the WorkCentre Pro 580 to use less

toner on each page.

•Printer Setting: this feature is determined by the setting

you’ve made on the control panel of the WorkCentre Pro 580.

•Standard: does not save toner to print a document.

•Save: the WorkCentre Pro 580 uses less toner on each page.

NOTE: You can turn this feature on or off by the Toner Save button on the front panel (see page 1.29). The setting in the printer’s properties will override the setting on the control panel.

•Altitude Correction: The Altitude Correction option allows you to optimize the print quality if you are using the WorkCentre Pro 580 in high altitude locations.

6When you finish changing print settings, click OK until you see the Print dialog box again.

7 Click OK to start printing.

Printing 4.13