Xerox Pro 580 manual Start/Enter button, Junk FAX Barrier

Select ON to turn on caller ID display.

Select OFF to disable.

Press or repeatedly to select on or off, press the

Start/Enter button.

•JUNK FAX BARRIER :

With this feature set to ON, the WorkCentre Pro 580 will only accept a fax sent from a remote fax when the fax number reported by the remote machine is stored in the WorkCentre Pro 580’s memory as a one-touch or two-digit speed dial number. This feature is useful for blocking any unwanted fax.

Select ON to turn this feature on. You can receive only from the registered stations. Select OFF to turn this feature off. Anybody can send you a fax.

Press or repeatedly to select on or off, press the Start/Enter button.

NOTE: This feature needs the number reported by the remote fax to be an exact match to a one-touch or speed dial number in the WorkCentre Pro 580. If you have a problem receiving faxes, turn this feature off.

DRPD (Distinctive Ring Pattern Detection) MODE : “Distinctive Ring” is a telephone company service which enables a user to use a single telephone line to answer several different telephone numbers. Each number is identified by different ring patterns.

The DRPD setting will delay the set RINGS TO ANSWER by one ring because it is comparing each ring to memory. Using the Distinctive Ring Pattern Detection feature, your fax machine can “learn” the ring pattern you designate as the fax line. Once the pattern is learned, you can select DRPD Mode, and the WorkCentre Pro 580 will ignore any other ringing patterns on that line. Any telephone device connected to the EXT. LINE will continue to respond normally to the other ringing patterns.

3.10Fax and Copy Operations