Xerox Pro 580 manual Chain Dialing

Chain Dialing

Chain dialing allows you to manually add a dialing prefix to any of your pre-programmed 20 One-Touch numbers. By using chain dialing, you may enter a long distance code or access code then press the programmed one-touch number. The WorkCentre Pro 580 will dial the code then the fax number in the One-Touch and transmit the document.

1Adjust the document guides to match the width of the document. Load your document face down into the automatic document feeder until it is grasped and pulled into the machine. If necessary, adjust Resolution and Contrast. For details, see page 3.13.

2Press the OHD/V. Req (Off hook dial/Voice request) button. When you hear the dial tone enter your long distance code or access code, you will hear the machine dial the numbers that you press. Press the desired One- Touch button for your fax number destination. Then press the Start/Enter button. The WorkCentre Pro 580 will dial the stored One-Touch phone number and after it connects to the remote fax machine it will send the document.

NOTES:

•This feature will only work in conjunction with the One- Touch locations. It will not work with speed dial numbers or group numbers.

•Only manual transmissions from the automatic document feeder may be performed with the chain dial feature.

•Chain dialing only works with numbers entered before the press of the One-Touch button.

Fax and Copy Operations 3.45