York YCAS0130 manual Temperature And Flows, Technical Data, Si Units

Technical Data

FORM 201.19-NM1 (204)

TEMPERATURE AND FLOWS

(SI UNITS)

MODEL	LEAVING WATER		Evaporator FLOW			AIR ON CONDENSER (°C)
NUMBER	TEMPERATURE (°C)			(l/s3)
YCAS
	MIN.1	MAX.2	MIN.		MAX.	MIN.	MAX
0130EC	4.4	12.8	8.7		33.1	-17.7	51.7
0140EC	4.4	12.8	8.7		33.1	-17.7	51.7
0150EC	4.4	12.8	12.6		37.9	-17.7	51.7
0160EC	4.4	12.8	12.6		37.9	-17.7	51.7
0170EC	4.4	12.8	12.6		37.9	-17.7	51.7
0180EC	4.4	12.8	12.6		37.9	-17.7	51.7
0200EC	4.4	12.8	15.8		47.3	-17.7	51.7
0210EC	4.4	12.8	15.8		47.3	-17.7	51.7
0230EC	4.4	12.8	15.8		47.3	-17.7	51.7

NOTES:

1.For leaving brine temperature below 40°F (4.4°C), contact your nearest YORK office for application requirements.

2.For leaving water temperature higher than 55°F (12.8°C), contact the nearest YORK office for application guidelines.

3.The evaporator is protected against freezing to -20°F (-28.8°C) with an electric heater as standard.

Excessive flow, above the max GPM, will damage the evaporator.

50 YORK INTERNATIONAL