3Com 4.2.2 manual Configuring LAN Emulation Services

Configuring LAN Emulation Services 4-17

To configure the NMS:

1Connect the NMS to port 1 on one of the 2700s.

2Ping all the devices. Be certain that both the CoreBuilder 7000 management ports are connected to the bridge 0 ports on the 2700s. Make sure they appear in the HPOV IP map.

3Run the ATMvLAN application.

Make sure all that all the devices appear in the ATM Devices Map and that the LES/BUSs from both the CoreBuilders appear in the LAN Emulation Backbone and Services map.

Be certain that there are segments in the admin VLAN, they will appear as VN-ELANxxx_0, and in the 2nd VLAN (bridge 1 VLAN) in the VLAN Map. Only two VLAN icons appear green, the rest appear brown indicating that they are empty.