3Com 4.2.2 manual SuperStack II Switch 2700 Parameter and Status Information, 12Window Actions

4-48CHAPTER 4: NETWORK CONFIGURATION TASKS

Table 4-10Port Parameters

Parameters	Meaning
MTU	The size of the largest packet which can be
	sent/received on the interface, specified in
	octets.
Speed	An estimate of the interface's current
	bandwidth in bits per second.
Address	The interface's ATM address.

The port status is:

Table 4-11 Port Status

Status	Meaning	Values
Admin Status	The desired state of the	Enabled
	interface. (The port is	Disabled
	enabled/disabled by	Test
	software).
Oper Status	The current operational	Up
	state of the interface.	Down
		Testing
		Unknown
		Dormant

Table 4-12Window Actions:

To:	Select:	Click
Change administration status of	Admin Status option	Apply
port	menu
Close window		Close

SuperStack II Switch 2700 Parameter and Status Information

The SuperStack II Switch 2700 Parameter and Status Information window is displayed in Figure 4-17. The window shows system and chassis Information. This information is read-only.