3Com 4.2.2 Locate the ATM Devices, Display Existing VCs, Establishing Permanent Virtual Channels

Configuring PVCs 4-57

Table 4-24Window Actions:

To:	Select:	Click:
Close window		Close

Configuring PVCs You can configure Permanent Virtual Channels between ATM devices.

To configure Permanent Virtual Channels between ATM devices:

1Locate the ATM devices that are to be connected. See “Locate the ATM Devices” on page 4-57.

2Display existing VCs between ATM devices. See “Display Existing VCs” on page 4-57.

3Establish new Permanent Virtual Channels. See “Establishing Permanent Virtual Channels” on page 4-57.

Locate the ATM Devices

To locate the two ATM devices, proceed as follows:

1Select an ATM Network Map.

2Select two ATM switches for which the PVC is to be established.

Display Existing VCs

To display existing VCs between two ATM devices:

1Select the two ATM switches for which the PVC is to be established.

2Select the Path icon or Path Assistant from the ATMvLAN menu.

The ATM Path Assistant window displayed showing the existing VCs between the two ATM devices.

Establishing Permanent Virtual Channels

To establish a PVC between the two ATM devices:

1In the ATM Path Assistant window select VC -> Add PVC.

2In the VPI-VCI field enter the Virtual Path Identifier/Virtual Channel Identifier for the new PVC.

Enter the VPI and VCI with a space between them.