3Com 4.2.2 manual Equipment

		Equipment Conventions 11
	Table 3 Text Conventions (continued)
	Convention	Description
	Commands	The word “command” means you must enter the command
		exactly as shown in text and press the Return or Enter key.
		Example:
		To remove the IP address, enter the following command:
		SETDefault!0 -IP NETaddr = 0.0.0.0
		Note: This guide always gives the full form of a command in
		uppercase and lowercase letters. However, you can
		abbreviate commands by entering only the uppercase letters
		and the appropriate value. Commands are not case-sensitive.
	Screen displays	This typeface represents information as it appears on the
		screen.
	The words “enter”	When you see the word “enter” in this guide, you must type
	and “type”	something, and then press the Return or Enter key. Do not
		press the Return or Enter key when an instruction simply says
		“type.”
	[Key] names	Key names appear in text in one of two ways:
		■ Referred to by their labels, such as “the Return key” or
		“the Escape key”
		■ Written with brackets, such as [Return] or [Esc].
		If you must press two or more keys simultaneously, the key
		names are linked with a plus sign (+). Example:
		Press [Ctrl]+[Alt]+[Del].
	Menu commands	Menu commands or button names appear in italics. Example:
	and buttons	From the Help menu, select Contents
	Words in italicized	Italics emphasize a point or denote new terms at the place
	type	where they are defined in the text. (continued)
	Words in bold-face	Bold text denotes key features.
	type
Equipment	In this guide the term “Edge device” refers to any of the following:
Conventions	SuperStack II Switch 2700, 7200/7400 ATM/Ethernet Interface Card,
	7600 Fast Ethernet Interface Card, Super Stack II Switch
	1000/3000,NetBuilder II, CoreBuilder 4000,Super Stack II Switch 2000,
	CoreBuilder 2500/6000 and CoreBuilder 5000 Switch Module and the
	term “ATM Switch” refers to the CoreBuilder 7000 ATM Switch.