3Com 4.2.2 manual CB7000 Fast Setup Tool

2-8CHAPTER 2: CONFIGURING AND LAUNCHING THE ATM AND VLAN MANAGER

3The Network Management Station should be connected directly to the switch running the primary LECS. This will ensure that the NMS always has access to the LECS so that it can enable the backup LES when the primary LES fails. See “Description of LES/BUS Redundancy” on page 4-10.

The CB7000 Fast Setup Tool

This CB700 Fast Setup icon opens a wizard that allows to configure the CoreBuilder 7000.

To use the Fast Setup Tool.

Click on the FSetup icon in the ATMvLAN Toolbar. Step by step procedures are displayed that allow you to configure the CB7000.

ATM Edge Device ATM edge devices such as Super Stack II Switch 2700, CoreBuilder 7200, Configuration Switch 1000, CoreBuilder 5000 Switch Modules etc., provide the legacy

LAN-to- ATM integration. Some of these edge devices need to be pre-configured to enable the LAN Emulation Clients within them. Typically, this involves configuring the local bridge groups within the devices and their corresponding LECs. Please refer to the appropriate device configuration manuals for information on VLAN/ELAN configuration of these devices.