3Com 4.2.2 manual System Messages B-7

System Messages B-7

Table B-1System Messages

Message	Type	Meaning	Action
Backbone Services Configuration:	error		None
SNMP SET error - [SNMP status] - for
CoreBuilder - [device IP address].
CoreBuilder skipped.
Backbone Services Configuration:	warning		Synchronize the DB.
LECS DB is not synchronized. Make
sure to synchronize it using this
window.
Backbone Services Configuration:	error		None
SNMP GET error - [SNMP status] - for
LECS - [device IP address]. Operation
aborted.
VLAN Creation: Must enter VLAN ID.	warning		Re-enter VLAN ID.
Operation stopped.
VLAN Creation: No blanks allowed in	warning		Re-enter VLAN ID.
VLAN ID. Operation stopped.

VLAN Creation: [network number]	error
must be a valid IP Address. Operation
aborted.

Re-enter network number.

VLAN Creation: [network mask] must error be a valid IP Address. Operation

aborted.

Re-enter network mask.

VLAN Server: VLAN Server is not	warning
defined. Use "VLAN Server Setup” to
define it.

Define the VLAN Server IP address and try again.

VLAN Server: SNMP GET error - [SNMP	error	None
status] - in Server - [device IP address].
Operation aborted.
LECS Configuration: LECS is not	error	None
enabled. Operation aborted.
LECS Operation: SNMP GET error -	error	None
[SNMP status] - for LECS - [device IP
address] Operation aborted.
LECS Operation: Cannot find LES ATM	error	Reset the LECS CoreBuilder to
address for alias - [alias]. Operation		the factory default and restart
aborted.		the operation.
LECS Operation: Cannot find ELAN ID	warning	None
for alias - [alias]. Changing [alias] to
[first ELAN in the list].
MEDP is not running	error	Start the MEDP Poller. Select
		Start-> Programs-> Transcend
		ATMvLAN -> ATMVLAN Poller.