3Com 4.2.2 manual Module Status is, 22Module Parameters, 23Module Status, 24Window Actions

4-56CHAPTER 4: NETWORK CONFIGURATION TASKS

To access the window:

■From a CoreBuilder.x.x.x.x, select Switch Board Module and then with the device view displayed, select Configuration Assistant from the ATMvLAN menu.

The Module Parameters are:

Table 4-22Module Parameters

Parameters	Meaning
Location	Module slot number starting from 1.
	Counting starts at the upper-most module.
Type	An authoritative identification of the type of
	physical Module in this physical location.
	(Switch Board).
S/W Version	A textual description of the version/revision
	for this Module’s software.
H/W Version	A textual description of the version/revision
	for this Module’s hardware.
Serial	The serial number of the physical Module
	present in this physical location.

The Module Status is:

Table 4-23Module Status

Status	Meaning	Values
Admin Status	The desired state of the	None
	module.	Enabled
		Disabled
		Reset
		Load
		Test
Oper Status	The current operational	Other
	state of the module.	Invalid
		Test
		Oper
		Reset
		Warning
		nonFatalError
		fatalError

Table 4-24Window Actions:

To:	Select:	Click:
Change administration status of	Admin Status option menu	Apply
module