3Com 4.2.2 manual NNIx Map

Measuring Network -wide ATM Traffic Performance Using the Bandwidth Icon 7-3

To select a switch for display on the active NNIx Map

1Click on the ATM Switch entry in the NNIx Browser.

2Click on the Show (plus) icon.

To select a switch hierarchy for display on the active NNIx map

1Click on the ATM Switch entry in the NNIx Browser.

2Click on the Show Subtree (double plus) icon.

Once the switches are added to the NNIx map, data collection starts automatically.

To delete nodes from the NNIX Map:

SIn the NNIx Browser, select the node and then select the “-” icon or

in the NNIx Map, select the nodes and then select Map -> Delete Node. Select Map -> Clear All to clear all the nodes from the Map.

NNIx Map The NNIx Maps display the traffic patterns on the ATM switches. Each NNIx map is given a unique consecutive number. After you close a map, and open a new map, the map receives the first available number of the map that was closed. For example, Maps 1, 2 and 3 are created. Map 2 is closed. The new map will receive the number 2.

Figure 7-2 NNIx Map