Vlan

Configuring and Using the MACvDB 4-31

A warning message appears.

Figure 4-9The Locator Tool/MACvDB Tab

Apply the MAC-based

Auto-configuration

to the Devices

To apply the MAC-based auto-configuration policy to the devices you have to move the devices into the MAC-based policy.

To move the devices into the MAC-based policy:

1Select the edge device in the ATMvLAN Devices map

2Select the MacBaseVlanPolicy icon in the ATMvLAN Policies map and then select the VLAN Move icon or the Move option from the ATMvLAN menu.

The policy icon turns yellow, indicating that there are devices in the policy.

To remove a device from a policy:

1Select the device in the policy map and then select the NullPolicy icon.

2Select the Move icon or the Move option from the ATMvLAN menu.