3Com 4.2.2 manual Manual Lecs, Database, Modification

5-14CHAPTER 5: NETWORK MODIFICATION TASKS

Manual LECS	The Manual LANE Redundancy Configuration Assistant is used for
Database	manually modifying a specific LECS database, to enable a backup LES, or
Modification	to re-enable a primary LES when the backup is enabled. This
	configuration assistant allows the operator to manage manual LANE
	redundancy.
	The failed LES is located according to its address by scrolling the ELAN IDs
	window and the backup LES is activated by clicking on its radio button.
	Manually Modifying LANE Redundancy
	You can modify the database of an LECS that was not automatically
	changed by the LANE monitor using the Manual LANE redundancy
	Assistant.
	To modify the database:
1	From the LAN Emulation window or Topology Browser select the
	Backbone and Service icon or branch.
2	From the ATMvLAN menu select Zoom Physical. The Backbone and
	Services window is displayed.
3	Select the LECS which contains the database you want to modify.
4	Select the Configure Assistant option from the ATMvLAN menu. The
	Manual LANE Redundancy window is displayed. See Figure 5-6.

Figure 5-6The Backbone and Services Configuration Assistant/Manual LANE

Redundancy