3Com 4.2.2 manual They are not defined on

B-4APPENDIX B: TROUBLESHOOTING

Table B-1System Messages

Message	Type	Meaning	Action
ATMvLAN Devices Configuration:	error		Change IP address.
Invalid IP address
ATMvLAN Devices Configuration:	error		Change Community string.
Invalid Community string

VirtualLANs Configuration: No VLAN	error	Application needs LAN
IDs found. Operation aborted.		Emulation Services (LES) and
		they are not defined on the
		Network

Enable at least one LES and then try again

VirtualLANs Configuration: Cannot	error	Change file writing
open file VnRgb for writing:		permissions.
permission denied. Operation aborted.

VirtualLANs Configuration: No blanks warning allowed in VLAN name. The VLAN will

be [truncated name].

Re-enter VLAN name.

VirtualLANs Configuration: VLAN must	warning
have its VLAN ID as one its names.
Name not deleted.
VLAN Move: Trying to move LEC	warning	Select a different VLAN.
segment - [segment number] - to
WorkGroup - [WorkGroup]. Segment
skipped
VLAN Move: Trying to move	warning	Select a different VLAN.
WorkGroup segment - [segment
number]- to - ELAN/[VLAN]. Segment
skipped.

VLAN Move: Select segments from	error
one device only. Operation aborted.

You cannot create a local VLAN on more than one device in one action. Use a separate Move command for each device.

VLAN Move: Operation completed	info	None
successfully for device - [device IP
address]
VLAN Move: No P2C found in device -	error	Check the P2C card.
[device IP address]. Device skipped.

VLAN Move: SNMP GET error - [SNMP error status]- in device -[device IP address].

Device skipped.

Wait for the ATMVLAN maps to refresh. Check the VLAN maps for results of the previous operation and then retry.