3Com 4.2.2 manual Ethernet Port Parameters & Status Configuration Assistant

Configuring or Viewing Administrative Status of ATM and VLAN Components 4-45

Ethernet Port Parameters & Status Configuration Assistant

The window shows the Port Parameters and the Port Status of the selected Ethernet port.

Ethernet Port Parameters & Status Window is displayed in Figure 4-15.

Figure 4-15The LsEthPort Parameters Configuration Assistant

To access the LsEthPort Configuration Assistant window:

■In the ATM Switch window, from Switch x.x.x.x, select an Ethernet port and then with the device view displayed, select Configuration Assistant from the ATMvLAN Toolbar.

■From an ATM SuperStack, select an Ethernet port on a SuperStack II Switch 2700 module and then with the device view displayed, select Configuration Assistant from the ATMvLAN Toolbar.

■From the CoreBuilder 7000 Front Panel, select an Ethernet port on a 7200 Card and then with the device view displayed, select Configuration Assistant from the ATMvLAN Toolbar.