3Com 4.2.2 manual Using the Vlan Move Operation

5-2CHAPTER 5: NETWORK MODIFICATION TASKS

Several methods are provided for moving Ethernet segments between

VLANs. They are detailed in the following sections.

■Using the VLAN Move Operation

■Drag-and-Drop Ethernet Segments Between VLAN Windows.

■For the SuperStack II Switch 2700 or CoreBuilder with 7x00 card, see Drag-and-Drop on Front Panel Window.

■Automatic VLAN Moves Based on Policies.

■Moving Ports Between Protocol-based VLANs.

The first two methods work on all VLAN types; the others apply to specific types of VLANs as denoted. With the first method you can “aggregate” segments to move many segments at once and you can move segments to different VLANs at the same time. The second and third methods are more intuitive and are quicker for moving individual segments.

Using the VLAN Move Operation

To use the VLAN Move operation:

1Select the Ethernet segments to be moved in either the VLAN-name window or the LANE User window.

2Select the destination VLAN in the Virtual LANs window and then from the ATMvLAN menu select ATMvLAN Move.

You can locate the Ethernet segment icons by stepping down through windows. Alternatively, if the segment label is known to you, you can use the HPOV Locate option. see “Locating Ethernet Segments Using the HPOV Locate Option” on page 5-6.