118 CHAPTER 4: ADDING VCX TELEPHONES AND ATTENDANT CONSOLES
For each number configured for selective ringing, you can select one of 9
tones and for each tone you can choose to have the telephone ring once,
twice, or three times.
To set a selective ring tone for a phone:
1In the USERS menu, click Users.
The Users page appears (Figure 30).
2Click Phones in the Phones column.
The User - Assigned Phones page appears.
3Click Selective Ringing in the Actions column for the user’s phone you
want to configure.
The Selective Ringing page appears. See Figure 38.
Figure 38 Selective Ringing Page
The Selective Ringing page displays two columns that allow you to set
ring tones for the current extension (in Figure 38, 641005) for the
following types of calls:
■Incoming Calls — Allows you to assign a ring tone to a particular
extension. When the user at that extension calls, the user (in this case,
641005) hears the selected ring tone. To assign a ring tone to an
incoming call for the phone selected in step 3, go to step 4.
■Hunt Group and Bridged Calls — Allows you to assign a ring tone
to a user’s phone for a hunt group extension or bridged line. In
Figure 38, the user (641005) is a member of the hunt group at
extension 641010. Also, extension 641004 is bridged to this user’s
extension, 641005 (a call to 641004 rings on both extensions).